The ROFES set

Modules and technologies of the ROFES software

• "Diagnostics"
• "Therapy"
• "Colour therapy"
• "Selecting and testing remedies"
• "Electronic selector of testing the infectious agents"
• "Registry"
• "Telemedicine"
• Technology "Rejuvenation and weight normalization"
• Autonomous software “Monitoring of adaptation and correction – MONICOR” by one/two points. “ROFES” software version 4.01

Module "Diagnostics"

Three core measuring methods and analysis of the data obtained are the foundation of the "ROFES- diagnostics":

• Corporeal method - traditional, by 12 main meridians;
• Su Jouk - projecting method by bel-meridians of hand;
• Vertebrology- diagnostics method by zones of spinous process of vertebra and by projection vertebral zones in Su Jouk system (see more in the article…).

The current of measurement is bipolar (30; 60; 120 mcA), voltage - 4V.

One of the main advantage of the ROFES diagnostics, allowing to obtain authentic signs of clinical diagnoses confirmed by medical tests, is the computer analysis of human structures' three-dimensional matrixes united in an integrated system. This system reflects all the aspects of body state: as medical, characterizing the full "health cut", as well as psychological, reflecting one's emotional state defining one's behaviour in some situation.

The first multi-vector matrix is a Diagram based on the results of body's 12 main paired meridian diagnostics.

Pic.1.

The second multi-vector matrix is a Frequency Spectrum obtained from each point of the meridians measured.

Pic.2.

The third multi-vector matrix is a Chart based on the results of diagnosing 29 projection zones above spinous process of vertebra.

Pic.3.

To fulfill a multi-level analysis "Expert System" module combines these energy structures, attaches anamnestic observations and anthropometric data and gives out a formalized conclusion about the patient's state (See conclusions of Expert System in Slide show).

Dividing clinical and psychological state allows to increase the diagnostics reliability and allows the patient to become aware of his psychological portrait which in most cases is the prime cause of his disease. Opportune correction of the patient's psychoemotional state according to the individual program in "Colour therapy" module often gives efficient positive effect.

The integration of all multi-vector matrixes is displayed in the software in the form of mathematic model of body's biofield structure (three-dimensional matrix of body structure).

Pic. 4. Biofield structure of human body

Additional methods in "Diagnostics" mode

Chakra-diagnostics by Su-Jouk - electroacupuncture diagnostics by energy centers in the "correspondence system" of Su Jouk method with the graphic display of energy centers' state; starting from Version 3.12 of the software three-dimensional model of energy centers' state is included.

Pic. 5.

AWP Express-diagnostics and Correction - short variant of AWP CORPOREAL METHOD, is used for patient's state express-analysis during rehabilitating procedures.

Express-diagnostics method is divided into three types:

• by 12 points
• by 6 points
• by 1 points

The main features of express-method by several points are:

• reducing the time of examination;
• obtaining individual corridor of patient's normal functional state, relatively to which multi-frequency correction with biofeedback will be made;
• obtaining spectrum characteristics for assessing the patient's state by nosologies, syndromes, symptomocomplexes and generating the signal of multi-frequency correction;
• obtaining integral characteristics of patient's adaptability during rehabilitation procedures for monitoring.

Starting from Version 3.12 in "Diagnostics by one point" mode there is an automatic start of repeated measurement by one point with changed current (120 mcA) in order to improve reliability of diagnostics and remove background noise. The first measurement is a kind of test for the point measured.

Additional options in "Diagnostics" module

Assessing the effectiveness of rehabilitation procedures is made for assessing the patient's meridian system changes in dynamics during a certain period of time between two diagnostics (Pic. 6).

After choosing two "rofograms" necessary for comparison in the right table the assessment of effectiveness/not effectiveness is calculated. It shows the patient's meridian system state change that occurred during chosen period of time (between the dates of patient's measurements).

Dynamics of rehabilitating procedures process is aimed at assessing the dynamics of rehabilitating procedures process separately by each meridian during monitoring. The diagram is build for each meridian and shows how the meridian changed its state relatively to rehabilitating procedures process (Pic. 7).

Dynamics of Adaptation Potential integral assessment shows graphical changes of Adaptation Potential during certain period of time in the course of various treatments.
There is 3D model of six basic elements in shape of SCALES (CRYSTAL). It allows to visually assess the changes of six basic elements while they are put on "scale" (Pic. 8).

Pic. 8

Table of spectrum characteristics tendencies. Beginning from Version 3.12 there is "Tendencies Table" in mode "Express diagnostics and correction" where you can analyze the frequencies coincidence for a patient by random number of measurements (diagnostics) with the desired mathematic expectation.

Module "Therapy"

According to the obtained body structures' 3D matrixes the doctor is offered the ways of correction courses with using all body's communication systems: verbal, visual, sensory, meridian, covering the widest spectrum of environment's wave characteristics perception. Each of the communication systems mentioned transmits necessary correction signal to corresponding matrix awaiting for the correction. The whole complex of correction treatment courses enables to most efficiently carry out patient's rehabilitation and correct his 3D matrix structures.

Brain functions' matrixes are corrected through the energy information perception by the meridian structure controlling all the organism systems and providing the mechanism of connection among human physiological structures and generated psychic functions. This leads to the correction of mental states, and finally somatic deviations.

Thus, bringing body's meridian structure into harmonious state as a result of correction treatment by body's functional frequencies obtained during diagnostics leads to recovery from most of diseases. The number of procedures is defined by the degree of illness severity.

Simultaneous perception of the correcting information of narrower environmental wave spectrum - video and audio- provides fixing of positive achievements in the correction of body's meridian structure (See the description of "Colour therapy" module).

All the treatment is dosed and is performed under computer control via bio feedback on patient's diagnostics result. The treatment is automatically stopped after the corrected points' energy state reaches individual functional norm corridor.

Technologies of "Therapy" Module

Correction Algorithm 1 allows to correct meridian system state following the automatically offered algorithm. The program chooses one or a number of points out of diagnosed, selects functional frequencies of these points and forms the correction signal.

Correction Algorithm 2 is made only for doctors. The program chooses one point out of diagnosed which is the most sensitive at the moment. The doctor can make the following correction:

• Electroacupuncture therapy.
  Low frequency exposure to BAPs and BAZones by nosologies and symptomocomplexes calculated by Voll and Mandel methods, with bio feedback of watching the therapy results on PC display by the doctor ( below threshold treatment). Bipolar current- 30,60,120 mkA; tension- 4V; following frequency - 1-100000 Hz
• MRT- magneto-resonance therapy.
  Low frequency exposure to BAPs and BAZones by nosologies and symptomocomplexes calculated by Voll, Mandel and Sh. Valdemar methods ( below threshold treatment). Magnetic induction - 2-15 mkTl; following frequency - 1-100000 Hz.

Specialist can select BAPs and BAZones for correction by frequencies entered into program and corresponding to nosologies and symptomocomplexes by Voll and Mandel methods.

All the correction is performed with the computer control via biofeedback on patient's diagnostics result.

"Taking photo of the disease" technology. It is a correction by the point corresponding to "pain syndrome" by Su Jouk method. It is started in mode "Express-diagnostics and correction by one point".

See more information about the technologies in slide-show "Algorithm of work and technologies of the ROFES software".

Additional options in "Therapy" module

• Transferring frequencies of corresponding nosologies into homeopathic carriers;
• FREQUENCIES GENERATOR within the range of 1 to 100000 Hz allows to create frequency chains of correction with adding the existing information and wave methods (SCENAR, DENAS, ZIPPER, etc.).
• Function of compressing frequencies for transfer to homeopathic carriers with saving these correction schemes in the patient's data. It helps to save time during the transfer to homeopathic carriers according to diagnostics results in all methods.
• Selecting frequencies from correction schemes according to frequency diagnostics results. It is available in mode "Conclusions and correction" in all methods.
• Function of saving correction scheme in patient's database. Available in all methods. It can be started in "Conclusions and Correction" mode. The scheme is saved in "Physiotherapy" mode and can be corrected by doctor according to the duration of each frequency from the scheme.
• Correction with biofeedback. For visual tracing on point's reaction to correction process there is a visual outline of initial value of a point.
• Correction with biofeedback. An automatic analysis of the corrected point (system) OVERACTIVATION is introduced. In case of overactivation during one minute, the process of correction is stopped.
• Beginning from Version 3.14 there is Frequency correction scheme export file with a possibility of recording on CD for a patient.

Module "Colour therapy"

Color therapy. Special designed modules of visual stimulation with the feedback to energy constitution - 6 ancient key elements (KE).

People receive 80% of information through vision.

People receive 80% of energy and information flow from environment through the meridian structure that controls human body and emotional sphere.

The ROFES device unites these two information flows via biological feedback and patient's state is harmonized and as a result, the patient is cured.

In "Colour therapy" module there is an automatic selection of psychological affirmations according to the Expert System conclusions about backbone's functional state. Combined treatment of colour, music and affirmations (positive motivations to change one's emotional state) increases the effectiveness of psychosomatic deviations treatment.

"Colour therapy" module is effective for psychosomatic diseases. Also, referring to the ROFES users reports on the seminars, the application of "Colour therapy" combined with other treatment has a positive effect in such cases as gastritis, duodenitis, neurodermatitis, arthrosis, stroke.

"Address Color Therapy" know-how!

The technology includes the "ROFES-Color therapy" individual software, which is patient-oriented. This allows installing it on the patient’s PC at home and in the office.

After being diagnosed by a specialist during the reception, the patient is given files with the encrypted data and then he installs them into the individual software on the PC at home or/and in the office. According to the specialist’s instructions he can carry out the relaxation color therapy seances during 3-4 days based on the diagnostics results. All the clinic information in the ROFES-Color therapy individual software is closed.

After 3-4 days the patient is recommended to be examined repeatedly in order to refresh the data about his psychophysiological state in order to correct the color treatment seances.

Module "Selecting and testing remedies"

Technology of testing parasitosis

The ROFES medical diagnostic tool realizes the method of selection and testing any material and information structures introduced into human' energy space and interacting with the last.

By diagnostic results it is determined whether human energy characteristics are harmonized when interacting with Bio active additions, allopathic and homeopathic remedies, or not.

After finishing the test and selection, the color and text estimations of remedy's compatibility with patient's meridian structure state are formed and supplied.

Testing parasitosis with using any kinds of nosodes. Special adapters are used to connect the ROFES device and any kind of nosodes.

"Electronic selector of testing the infectious agents"

In electronic selector there is an optimum set of infectious agents geographically connected with middle latitude of northern hemisphere.

It is aimed at testing parasites, viruses, bacteries.

Testing for type of patient's to allergy: regularly recurring, hormone-caused, initial.

Transferring to homeopathic carriers the information component of infectious agents tested and having positive resonance during diagnostics.

Module "Registry"

This module includes registration of medical records including visual information (photos, radiography and ultrasonic examination - pictures).

Capacity of database is limited by computer characteristics only (up to 10000 patients and 100 visits by each one).

• archiving data
• statistic processing of data by classifiers
• automatic collection of anamnestic and anthropometric data
• standard information units of rehabilitation kind
• computer generated medical report for print

Module "Telemedicine"

"Virtual polyclinic" Technology

The purpose of this technology and module: increasing the quality of help for patients based on creating information space that will unite knowledge and experience of various specialists regardless of their location.

All users of the ROFES hardware and software devices can participate in telemedicine system because ROFES is adjusted for the exchange of information about patients' diagnostics results for further transferring information-diagnostics data and obtaining additional consultation from various specialists from all over the world.

The algorithm of work is the following:

• The main center-server with various experienced specialists;
• Specialized medical centers;
• clients' stations - AWP ROFES

The "electronic connection" mode in ROFES software allows to send patient's diagnostics results, his anthropometric and anamnestic data, ultrasound, X-ray and video information to basic or specialized center. On the basis of information obtained the specialists of basic or specialized center give consultation and send a conclusion with necessary recommendations back to client's station - AWP ROFES. You can find more information about telemedicine system in the article "Some aspects of telemedicine".

Technology "Rejuvenation and weight normalization"

Technology includes diagnostics of musculoskeletal system in "Vertebrology" mode.
Selection of rational nutrition for weight normalization in mode "Diet by blood group".
Specially designed modules of affirmations for rejuvenation and weight normalization in mode "Colour therapy".

Version of the "ROFES" software 4.01. Monitoring of conditions adaptation and correction – “MONICOR”

• Monitoring of organs and organic systems functional condition: Diagnostics by one point with the estimation of basic life support systems stress–condition and distress condition estimation of all reflexotherapeutic points within 14 main meridians of human organism (361 points) with visualization on a person’s 3-D phantom (on the interval from 3 minutes to 4 hours).
• Monitoring of any external influence: Correction on a real-time basis with the estimation of basic life support systems stress–condition and the assessment of meridional framework functional condition and its visualization on a patient’s 3-D phantom (on the interval from 3 minutes to 4 hours).
• Diagnostics and Correction Monitoring by the “ROFES” device:. Simultaneously with diagnostics sessions on the given interval the frequency modules of correction are formed from a patient’s functional frequencies according to the data of diagnostics from one point.
• After each diagnostics session the correctional influence is optimized on the basis of constant frequency correction module change by a patient’s functional frequencies from the spectral data of continuous diagnostics within a series of given intervals. I.e. after each diagnostics session the correction process is constantly optimized through taking account of each previous diagnostics and correction result from the series of given intervals. All this is within the biological feedback regime taking into account a point’s over activation or its attainment of normal characteristic of individual norm corridor.
• Simultaneous launch of color therapy with the affirmations modules during the “MONICOR” sessions.
• Compilation of reflexotherapeutic prescriptions according to symptom complexes with impact zone visualization on a patient’s 3-D phantom.

The differences of “ROFES” ver. 3.17 software from previous versions (3.14; 3.15; 3.16).

• The shortening of each point diagnostics time by two seconds. Altogether 48 seconds less during a test.
• Optimization of work with electronic selector while testing infectious agents. The number of key presses while choosing the aggravation to be tested is decreased to two – 2 keys. In previous versions one had to press the sequence of 8 keys.
• Automated transfer to homeopathic carriers process for vibratory lines of those aggravations, which got a positive resonance (green assessments) in electronic selector as a result of testing. After pressing the key «Transfer» all aggravations with green assessments are automatically transferred to the module where one should only press the key «start transfer process».
• A simpler transfer to homeopathic carriers mode is introduced for vibratory lines of aggravations, selected on the basis of patient’s symptom complexes analysis (i.e. without testing in electronic selector). An operator on patient’s symptom complexes chooses infectious aggravations and through pressing a key they are transferred to the module, where one should only press the key «start transfer process».
• A combination of Colour therapy with bioresonance correction sessions for all correction modes. The combination allowed increasing the efficiency of rehabilitation procedures and decreasing the time of dealing with a patient.
• The appearance in Colour therapy of affirmations for weight reducing, health improvement, rejuvenation, marital relations normalization and giving up bad habits.
• A solid model is worked out – a patient’s phantom with estimation and visualization of COMPLETE portrait of each puncture point functional condition (points distress syndrome estimation) within all main meridians, anteromedian and posteromedian meridians according to the frequency diagnostics data (670 points). I.e. after diagnostics, apart from getting standard «rofes – diagnostics» assessments, the functional condition of meridian framework is visualized and assessed on the 3-D phantom of a patient.
• Each puncture point on a patient’s 3-D phantom has anatomical landmarks with detailed description of its localization.
• An automated program is worked out which compiles acupuncture prescription according to distress symptoms of a patient, with puncture points visualization on a patient’s 3-D phantom, their localization, rules of acupuncture realization, and description of concomitant symptom complexes, corresponding to the estimated points.
• Automatic treatment formulation according to symptom complexes, involving knowledge base on reflex therapy, frequency therapy according to Foll/Mandel, nosodes and infectious aggravations.
• A simpler mode of a patient’s functional frequencies transfer to ferromagnetic and homeopathic carriers is introduced. Now there is no need for the Operator to launch a sequence of “frequencies contraction” modes, to save them, to switch to another form views, to search there saved “contracted frequencies”, to select them and to start the process of transfer. In version 3.17 all these operations are automatically performed in one form view, where one needs only to activate this mode and make a click on “start frequency transfer” key. In the same form view one can see “concomitant points”, at which it will be necessary to place ferromagnetic carriers, without switching to another form views, as it was in previous versions.

Additional options in Version 3.14 software

• "Express-diagnostics and correction AWP" is fully completed.
  • Diagnostics by one point: to increase the accuracy and to remove noise frequency the automatic start of repeated measurement by one point with the change of measuring current (120 mcA) is introduced. The first measurement (60 mcA) is a functional test (provoking factor) for the point being measured.
  • The state of health assessment, automatically calculated by the result of frequency diagnostics, can be printed.
• There is a function of frequencies compression for transfer to homeopathic carriers. These correction schemes are saved in the patient's data. This option will save time during the recording of patient's functional frequencies onto homeopathic carriers by the result of frequency diagnostics using methods Su Jouk, Corporeal, Express-Diagnostics and Correction, Chakradiagnostics. The option can be started in "Conclusions and Correction" mode in the above mentioned methods.
• We have added new mode into the ROFES software called "Frequencies Generator" from 1 to 100000 Hz. You can also create frequency networks of correction adding the
existing information-wave methods into them (SCENAR, DENAS, ZIPPER, etc.) In 3.14 version the work with generator becomes more optimized.
• The doctor can select frequencies in schemes of correction by functional frequencies. This can be done in automatically created scheme based on the results of frequency diagnostics, mode "Conclusions and Correction" in all methods.
• There is a function of saving the scheme of correction by functional frequencies in the patient's data. It is available in methods Su Jouk, Corporeal, Express-Diagnostics and Correction, Chakradiagnostics. The option can be started in "Conclusions and Correction" mode in the above mentioned methods. The scheme created is recorded into "Physiotherapy" mode. The duration of each frequency can be corrected by a doctor with the use of "Frequencies Generator".
• Correction with biological feedback (BF).
  • In order to visually control the reaction of a point on the correction process there is an outline of the initial value of a point being corrected.
  • (BF) In modes "Algorithm 1", "Algorithm 2", "Conclusions and Correction" you can turn the biological feedback system off.
  • (BF) There is an automatic analysis of point (system) OVERACTIVATION. If the point being corrected is overactivated during one minute the process of correction stops.
• Beginning with version 3.11 and up there is a mode "Diagram of each meridian changes in dynamics". You can build a diagram for each meridian showing how its state changed in the course of treatment in relation to functional norm corridor. In Version 3.14 you can print all the diagrams.
• We have developed new program RofSet.exe which allows making the process of the ROFES software restoring automatical. Database is automatically saved, data are automatically exported. In previous versions the software could be restored by copying the program from ROFES RESERVE folder and then importing data saved before.
• Version 3.14 includes 3D model of six primary elements in the form of scales (crystal). It allows to analyse the changes of elements with the assessment of their oscillations as if on scales.
• In Expert System, mode Neurology, clinical descriptions of backbone diagnostics result conclusions are added.
• In Expert System you can select calculated diagnoses and states for print in order to exclude slight symptoms of diseases.